Ring Mounts

Barry Controls Defense and Industrial
METAL MOUNTS

Cup and Industrial Mounts


Metal Mounts are named to describe the type of material (typically Stainless Steel) used to make the resilient element component of the mount.  Metal Mounts are typically used for vibration isolation applications although some will provide limited to excellent shock protection for a given installation.  Metal mounts find the most use in harsh or extreme service environments; i.e., temperature and chemical.  Most of these mounts are  integrally fail-safe ensuring positive capture of the payload in the unlikely event of failure of the resilient element.  Use of a back up washer is required with the Metal-Flex bushings series to achieve a fail safe installation.  Most metal mesh mounts compress the resilient element in use no matter what the axis of input and perform best when supporting the primary static load axially through the mount. 

An exception to these descriptions is the Cable Mounts series as they are used in limited roll and tension modes and are not fail-safe* by definition.  *(Technical point; by definition, failsafe method is to be provided by means other than the resilient element.)

Select from one of the Metal Mount Types below  for more specific information.

Barry Controls Metal Mounts

METAL MOUNTS LOAD NATURAL ALL 1:1 PRIMARY
RANGE FREQUENCY ATTITUDE STIFFNESS APPLICATION

1200 Series

Barry Controls 1200 Mount Series

1-40  15Hz-20Hz  No Yes Vib/Shock
9300 Series

Barry Controls 9300 Mount Series

5-16 12Hz-15hz Yes Yes Vib/Shock
Metal-Flex Bushings

10-64 To 230hz Yes Yes Vib/Shock
Cable Mounts

0-1,800 10Hz-20Hz Yes No Vib/Shock

CONTENT OF THIS SITE COPYRIGHT AEK TECHNOLOGY 2014